NAT Reflection/NAT Loop back

NAT reflection refers to the ability to access he external services from the internal network by public IP. Mettle SE offers NAT reflection, but some IP network scenarios will require a split DNS infrastructure. Split DNS is explained in the Feature section.

To enable NAT reflection:
  1. Go to System >> Advanced Setup
  2. Under the section Network Address Translation uncheck "Disable NAT Reflection" check box
  3. Click on "Save" and NAT reflection will now be enabled.

Disables the automatic creation of additional NAT redirect rules for access to port forwards on your external IP addresses from within your internal networks. Note: Reflection for port forward entries is skipped for ranges larger than 500 ports.